Kawasaki FX850V premium and commercial grade V-Twin engine.
Engine guard.
Up to 17.7 kph top speed.
35.9 Litres fuel capacity.
Heavy-duty fabricated steel, 6” deep, reinforced 7ga XTF (Xtreme Turf Flow) deck.
Change on the go deck height dial with shock-assisted deck foot lift.
Cast aluminium spindles with sealed bearing four per spindle.
Long lasting deck belts are designed with large idler pulleys to minimise wear.
Vibration control deck system.
Fabricated heavy-duty steel frame.
ZTR is perfectly balanced with low centre of gravity.
GT-Trac for precision traction, balance and control on inclines.
Parker HTJ 12cc wheel motors.
Foot-operated parking brake.
Control panel with LCD display, an engine hour meter, mower deck hour meter and tachometer.
Push-start keypad.
12v Outlet.
Large cup holder.
Phone holder.
Deep storage tray.
Seat – TCB-3 TecsPak Elastomer Dampeners with 360 Floating System.
24″ drive tyres – turf radials.
13″ front caster tyres – radial.
Tow hitch.
Specifications
Warranty Information
Domestic Warranty
3 Years / 500 Hours Domestic Warranty (whichever comes first)
Commercial Warranty
2 Years / Unlimited Hours Commercial Warranty
Hire/Rental Warranty
No Hire / Rental Warranty
Dimension Specs
Dry Weight
502.5 kg (1107.8 lbs)
Height
75″ (1905 mm) With ROPS or 54” (1372 mm) Folding ROPS down
Width
55.5″ (1409.70 mm) w/discharge chute up
Zero Turn Mower Specs
Ground Speed – Forward
Infinitely variable up to 0-17.7 kph
Brakes
Foot-operated parking brake
Tyres – Drive
24” Turf radials.
Seat
TCB-3 TecsPak Elastomer Dampeners with 360 Floating System
Construction
Fabricated 7 Gauge with 7 gauge spindle mounts and 9/16 impact bar
Controls
Hand-operated choke, throttle, push button key, electric mower clutch, foot pedal parking brake
Cup Holder
Large Cup holder moulded into the right-side mud guard. Accommodates nearly any cup size
Deck System
Side-Discharge: 54″ (1372 mm) cut. (3) Blades, deck is suspended at two points at the rear and two in front. Includes deck-mounted anti-scalp wheel(s) to improve flotation in rolling and uneven terrain.
Deck Lift
Foot-operated with shock assist
Deck Construction
Fabricated 7 Gauge with 7 gauge spindle mounts and 9/16 impact bar
Blade Tip Speed
18,684 fpm / 5,694.88 mpm
Blade Drive
V-belt drive to spindles with electric clutch. Spring tension idler pulleys for extended belt life
Drive System
V-belt drive from engine crankshaft
Discharge Chute
High density, rubberised
Open Deck
Grass clears deck and discharge chute more easily due to the design (No restricting bar on the discharge side)
Steering
Twin-lever steering provides independent control of each drive wheel. Speed, forward, reverse, brake, and turns are all controlled with hand-operated controls
Blade(s) and Type
(3) Heavy-duty blades
Engine and Fuel Specs
Type
Air cooled, 90-degree V-Twin, normally aspirated petrol engine
Horsepower
27.0 hp (20.1 kW) @ 3600 rpm (Please Note: Horsepower rating as tested to SAE J1995 Standards)
Power Output
12-volt (see engine manufacturers specifications)
Cooling
Air cooled. Flywheel fan
Fuel
Unleaded fuel – maximum of 10% ethanol in fuel (see engine manufacturers specifications)
Fuel Filter
Replaceable, automotive-type
Oil Filter
Spin-on engine oil filter / Total oil capacity 2.5 U.S. qt. (2.4 litres) with filter
Air Filter
Heavy-duty, canister style air cleaner to extend the service interval for excessive, dirty applications and improved performance
Safety Features
Safety Features
Specifications subject to change without notice
Hydrostatic Drive System Specs
Hydrostatic Drive System
Parker HTJ wheel motors
Cutting Dimensions
Cutting Widths
54″ (1372 mm) cut Side discharge
Cutting Height(s)
Change on the go deck height dial with shock-assisted deck foot lift. 1.5” to 5.5” (38.1 mm to 139.7 mm) with 15 adjustable cut heights in between plus travel lock.